Agriculture 2680H High-Performance Disk

Disks Agriculture 2680H High-Performance Disk

Double tap to zoom

 

Features

Wide range of working widths available to match acreage and power requirements

The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.

 

This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft or wet conditions it may require an additional 25% engine horsepower to maintain operating speeds at preferred working depth.

Integral three-point rigid models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
3.05 m (10 ft) 5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

 

One-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
3.05 m (10 ft) 5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

 

Two-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
4.85 m (15 ft, 11 in.) 9.0 ha (22.2 acres)
5.4 m (17 ft, 7 in.) 9.8 ha (24.3 acres)
6.4 m (20 ft, 11 in.) 11.8 ha (29.2 acres)
7.4 m (24 ft, 4 in.) 13.7 ha (33.9 acres)
Three-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
7.6 m (25 ft) 14.1 ha (34.8 acres)
9.1 m (30 ft) 16.9 ha (41.8 acres)
10.7 m (35 ft) 19.7 ha (48.8 acres)
12.2 m (40 ft) 22.6 ha (55.8 acres)
13.7 m (45 ft) 25.4 ha (62.7 acres)

 

*NOTE: Minimum overlap of 15.2 cm (6 in.).

Individually mounted blades

The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.

To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.

Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.

Rear attachment options to match the operation

Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.

 

The cage roller is best for breaking up clods. Choose this rear attachment if the primary application is fall tillage. It is best in light to medium soils and has a diameter of 64.8 cm (25.5 in.).

 

The spring roller is best for medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. It has a diameter of 62.2 cm (24.5 in.).

 

The rubber roller is best for firming and preparing a seedbed in the spring. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).

Simple depth control and limited maintenance

Depth control is easy to set on the 2680H High-Performance Disk. The 2680H utilizes a shim system to control depth. Each shim is 1.3-cm (1/2-in.) wide. Simply remove the pin, raise or lower the number of shims needed to reach the desired depth, and replace the pin.

 

The 2680H also features greaseless bushings and bearings, allowing operators to get into the field faster without extensive daily maintenance.

Specifications

Key Specs

Working width 3.56 m
11.67 ft
Transport width 3.83 m
12.58 ft
Transport height 3.07 m
10.08 ft
Working depth 5.1 to 15.2 cm
2 to 6 in.
Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph

Machine

Working width 3.56 m
11.67 ft
Transport width 3.83 m
12.58 ft
Transport height 3.07 m
10.08 ft
Gang standards  
Gang angle  
Purpose Primary/Secondary
Working depth 5.1 to 15.2 cm
2 to 6 in.
Weight per blade 137 kg
302 lb
Blade size 50.8 cm
20 in.
Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph
Blade concavity  
Blade thickness  

Number of blades

Front blades 14
Rear blades 14
Total 28

Parts

We carry a full selection of maintenance and repair parts for agricultural, lawn & garden, and commercial equipment.

Learn More

Service

Gay Implement is dedicated and here to serve you. Our staff includes some of the most knowledgeable professionals in the business.

Learn More

Sales

With 60 years of combined sales experience, our sales team is dedicated to making sure that our customers purchase the right equipment at the right price

Learn More

Parts

We carry a full selection of maintenance and repair parts for agricultural, lawn & garden, and commercial equipment.

Learn More

Service

Gay Implement is dedicated and here to serve you. Our staff includes some of the most knowledgeable professionals in the business.

Learn More

Sales

With 60 years of combined sales experience, our sales team is dedicated to making sure that our customers purchase the right equipment at the right price

Learn More